Instrument Cables

Epsilon EClipse™

	ER-9860	Epsilon EClipse bi-potentiostat cable
	ER-9861	Epsilon EClispe cell lead cable
	ER-9862	Epsilon EClipse cell stand cable
	ER-9863	Epsilon EClipse cell lead cable for screen printed electrodes

PalmSens

Click to Enlarge	Part Number	Description
	ER-9528	PalmSens4 or EmStat3(+) Blue to C-3 Cell Stand Control Cable
	ER-9529	PalmSens4 Cell Stand Cable
	ER-9539	Emstat3(+) and EmStat3(+) Blue Cell Stand Cable
	EW-7548	RDE-2 Control Cable for PalmSens4 and EmStat3(+) Blue

EC Epsilon

	ER-9515	C-2 and C-3 Cell Stand Control cable: 5 ft. ribbon, 25 pin female-25 pin male
	ER-9517	CGME Control: 5 ft. ribbon, 25 pin female-25 pin male
	ER-7526	Control Cable 37 Pin Female to 37 Pin Male  (previous item number EW-7526)
	EW-8109	Cell Lead - W2
	EW-8099	Cell Lead: 4 ft., Lemo-alligator clips
	EW-8111	Cell lead - 4 channel
	EW-7524	Analog Cable (LCM-1, PWR-3, RDE-1, RDE-2): 4 ft., Lemo-Lemo
	ER-9514	USB Cable, 10'

BAS-100B/W and CV-50W

Click to Enlarge	Part Number	Description
	ER-9525	PC: 10 ft., 9 pin female-25 pin male serial cable (replaces ER-9508)
	ER-9515	C-2 and C-3 Cell Stand Control cable: 5 ft. ribbon, 25 pin female-25 pin male
	ER-9517	CGME or PARC 303/303A Control cable: 5 ft. ribbon, 25 pin female-25 pin male
	EW-8099	Cell Lead: 4 ft., Lemo-alligator clips
	EW-7524	Analog Cable (LCM-1, PWR-3, RDE-1, RDE-2, AC Impedance): 4 ft., Lemo-Lemo
	ER-7526	Control Cable (LCM-1, PWR-3, RDE-1, RDE-2, AC Impedance): 4 ft. ribbon, 37 pin female-37 pin female
	VT-9505	USB to Serial Adapter

LC-3C/D/E Electrochemical Detectors

Click to Enlarge	Part Number	Description
	EW-8099	LC-3E Cell Lead
	EW-8112	LC-3C/D Cell Lead
	EW-8110	Recorder Lead

LC Epsilon

Click to Enlarge	Part Number	Description
	EW-8111	Epsilon cell lead cable- 4 channel
	EW-8119	Cable LC Epsilon cell lead- single channel

Power Cords

Click to Enlarge	Part Number	Description
	ER-8498	Power Cord, UK
	ER-8499	Power Cord, Continental Europe (except Italy and Denmark)
	ER-8502	Power Cord, USA, 7 ft.

Glovebox Feed-through Cable

An inert atmosphere is often required for electrochemical experiments when studying oxygen-sensitive or moisture-sensitive compounds. A common means to accomplish this is to work inside a glove box. However, the leak-proof feed-through cables required for connection between the external electrochemical instrument and the internal cell through the wall of the glove box can be a problem. A relatively simple and inexpensive solution is to mount a sealed LEMO feed-through connector to the wall of the glove box (F1). The panel cutout is shown in F2, but a 12.1 (+0.1, -0) mm diameter round hole will work as well. The female-to-female feed-through connector is air-tight and has an O-ring compression seal to the wall of the glove box. A short (2ft.) extension cable (free male LEMO to free female LEMO connector) is included and must be plugged inside the glove box. This short cable is required to correct the “crossing of lines” that occurs in the LEMO feed-through connector. The feed-through and extension cables accept standard BASi® cell lead cables.

External connection between an instrument and feed-through is via a Lemo to Lemo cable. Our standard length cable (EW-7524) is 4 feet long. Longer cables are available as special order.

Figure 1. LEMO feed-through connector

Figure 2. Panel cutout for feed-through connector

Ordering Information:

Contact BASi